* You are viewing the archive for the ‘photo’ Category

New PowerMac G4 Dual as Linux Server

VN:F [1.9.11_1134]
Rating: +1 (from 1 vote)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)
PowerMac G4 dual

PowerMac G4 dual 1.25 GHz MDD

My “new” home server/router: PowerMac G4 Dual 1.25 GHz MDD ($400 with monitor) with Debain/GNU Linux 5.0. It has 123 days uptime already!

Beige G3 as lab PC

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)

After some evenings I had increased screen size of my Beige G3 from 800×600 to 1152×864 (65536 colors):Then I installed 2 cheap ($20 each) PCI-cards in it: first is 2xCOM-ports:and second is 1xLPT-port:Basically it is the same card with different assembling…. Continue Reading

Black big-endian and little-endian

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)

This is my home working place where I can port software from little-endian machine to big-endian:Red table bought in IKEA. Right-bottom: Systemax server with Intel Core 2 Duo 2.6 ГГц (Slackware 12.2). Right-top: PowerMac G4 Cube (colored to black) with Debian 5.0 and preloaded libfreevec. Left-bottom: subwoofer Logitech, power adapter for Cube and Gigabit switch. Left-top: UPS CyberPower 1500AVR. In the center under the table: KVM IOGEAR (switching USB keyboard+mouse and VGA between both machines). In the center on the … Continue Reading

PowerMac G4 as Linux server

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)

My PowerMac G4 400MHz with Debian GNU/Linux 4.1 (that works as my home server and internet gateway since last summer) just got 157 days uptime (without reboots since January 28th 2009) before yesterday strange hanging that was resolved by manual rebooting…

P.S. Electric power stability is provided by APC Back-UPS ES 750 that may keep the server working without electricity for more than 40 minutes!

P.P.S. Last “north-easter” poweroutage proved that my system’s up time without electricity is 75 minutes!!!

Power Mac G3 for 10 bucks!

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)

Recently I bought Power Mac G3 (300MHz, 64MB RAM, Ethernet, CD-ROM and no HDD) for $9.99 (plus shipping $32.50):To make it working I added CompactFlash 2GB (around $10) and CompactFlash-to-IDE adapter (around $5):Adapter has female IDE connector to allow connection direcrly to motherboard. Also I put new battery ($5) there:Continue Reading

My G4 Cube turns BLACK

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)

I decided to use G4 Cube as my second desktop computer. But my first desktop PC is black. So I bought black enamel spray for a reason to paint Cube to black color. The subject to turn black is internal metallic case:Now I have stylish black colored G4 Cube with Debian GNU/Linux 5.0 “Lenny” on board :) P.S. Lenny believes that X.org became smart enough to … Continue Reading

G4 Cube

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)

Finally I did it – I bought G4 Cube for myself! $250 (plus shipping) for PowerPC G4 450 MHz system is a little bit expensive, but it’s CUBE:It even has “cracks” (as probably all G4 cubes ;) Of course I put Debian GNU/Linux on it and removed MacOS 9.2 that was preinstalled there.One strange (for me) thing about G4 Cube is its power … Continue Reading

Desktop Power Macintosh G3 "Beige"

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 5.0/5 (1 vote cast)

A few days ago I bought Power Macintosh G3 with PowerPC G3 processor (300MHz) for 25 dollars (and 45 shipping):It has old Apple monitor connector and because of that I needed VGA-adapter (5 dollars on ebay) to connect my Samsung 19″ monitor to this machine:It was shipped with MacOS 9 onboard that can handle screen dimension up to 1280×1024 (with 256 colors):… Continue Reading

Dirigible

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)

Sent from my Treo 680

Next oil change will be at 1970…

VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)
VN:F [1.9.11_1134]
Rating: 0.0/5 (0 votes cast)

Now oil company where I usually change oil uses new computerized system, so now I should change oil after 3 months since zero unixtime – April 1st, 1970 (or it may be April 1st, 2070? ;)